Trinity Pure Bond Resin Bonded GF Series Filters feature a micro fiberglass/Phenolic resin construction that produces an extremely rigid pore structure. This construction allows the filter to withstand extremes of viscosity and temperature without compression or collapse. In addition, a true graded density construction allows complete utilization of the filter’s depth, with coarse particles captured in the outer zones and finer particles captured nearer the core.
Features & Benefits:
• Rigid micro fiberglass/phenolic resin construction prevents unloading even at high differential pressures
• Grooved outer surface increases surface area for longer on-stream life
• Available in a wide range of removal effciencies from 0.5 to 150 microns
• Broad chemical compatibility
• Provided with outer cotton wrap to aid in handling and protect the surface
Applications :
• Paints, Inks
• Sealants • Adhesives • Lacquers • Varnishes, Shellacs • Fuel Oils, Crude Oils, • Grease
Machine Coolants • Silicones • Antifreeze • Plasticizers • Animal Oils
Filter specification :
Media
: Micro FiberGlass / Phenolic Resin
Core
: The Coated Steel
Outer Sleeve
: Cotton
Removal Ratings
: 0.5, 1, 5, 10, 25, 50, 75, 100, 150 Micron
End Connection
: DOE
Dimensions
Nominal lengths
Outside Diameter
Inside Diameter
: 9.75, 10, 19.5, 20, 29.25, 30, 39, 40 inches
: 2.6 inches (66 mm)
:1 inches (25.4 mm)
Operating Conditions
Maximum operating Temp
Recommended Change out differential pressure
: 10 Bar,93°C
3.4 Bar,190°C
: 35 psig